E Speed Parts Are Here! |
|
|
"To have my own line of stuff is great! Nothing has ever been recognized when I've come out with stuff
before... its kinda nice these parts are coming out as my stuff. And it makes the car quicker!" says Ellis
Stafford. Ellis joined X Factory almost a year ago, and he's been working since then to improve both cars.
He has always been known to do whatever it took to make his cars faster, and his skills modifing parts are
well-known throughout Europe. "I've had lots of ideas to impove cars through the years, and it's exciting
that these parts will finally be availble to the public. As time goes along, X Factory will be producing
parts to fit other cars, as well." |
|
| "I started working with SolidWorks early this year with pieces for my X Factory cars in mind. These first few parts I've drawn are simple, but still make a big impact on the cars." Since these are Ellis' parts, we annodized the parts in Royal Blue. Each is machined is C.N.C. machined for the best quality and strength. In the cars, these parts look really sharp while improving the car. |  |
| One of the first of the E Speed parts modify the rear camber link on the X - 6. They bolt onto the shocktower and hold the inner ballstud further out, shortening the rear link and lowering the roll center. Ellis explain's the purpose: "The camber link extenders give the X - 6 more steering. They help the car exit the turn, and then get on the throttle safer. Each X Team member has been running prototype pieces for several months and all agree that these bits really improve the car's handling." The machined motor plate braces are very simple: they strengthen the bracing and help keep the screw from backing out. |  |
You can find the first E Speed parts here. Keep checking back as Ellis will be adding parts just as soon as he draws them up!  |
|
| Click here to go home. | |
